Question 1

Do I need planning for a shed?

Accepted Answer

Garden sheds and summerhouses are considered to be outbuildings, which are permitted development. This allows you to put an outbuilding in your garden right up to the fence, providing you follow these guidelines.
Building height to be 2.5m max 
Behind the front line of your house (i.e. side or back garden) 
Not to cover half the garden.

You can build taller sheds providing you are 2m from your boundary.

WHEN DO I NEED PLANNING PERMISSION?
Planning permission will be required if you build inn the front garden
If you are in AONB or grounds of a listed building.
You are in a garden flat
You wish to build taller than 2.5m close to the boundary

Question 2

Does the shed include assembly

Accepted Answer

Yes it does. 
Our prices include assembly even if you live outside the free delivery zones. 
If you are outside the zone, the surcharge will be for the extra delivery charge to your area.

You can have it on a supply only basis if you're keen on DIY

Question 3

Who does the base?

Accepted Answer

The customer would do the base either as a DIY project, or using a local tradesman.

You could try www.mybuilder.com
Step 1. Select groundworks from the dropdown menu

Step 2. Choose Foundations for a structure to be built

Step 3. Choose Outbuilding or Garage

Step 4. Add the description…

‘Install a paving slab base for a garden shed to the size of     m wide x        m deep

Base to be flat & level with smooth finish to a tolerance of 5mm.

Step 5. Give your job a title – Garden Shed Base

Step 6. Add your postcode

Step 7. Add your email address

Step 8. Fill in the details and submit.

Question 4

What base do I need?

Accepted Answer

Like everything that is built to last - it needs a good foundation.

We would suggest paving slabs for the smaller buildings and concrete for the larger buildings, to get the best out of your shed or summerhouse. We can help out with that if needed.

Providing it it flat and level, you could simply put on hardcore or sleepers providing they are level, especially if you add a DPM (damp proof membrane) to keep to moisture coming up from underneath. It's not ideal, but it's a good way to save money - however on a long term basis it won't be as good as paving slabs or concrete.

It's important to have a level base, as this will ensure your doors open correctly, otherwise you may need to pack the building underneath the floor at a later date.

Question 5

Do you have any base recommendations?

Accepted Answer

Stratford on Avon - Warwick - Leamington Spa - Rugby - can remove existing sheds if required.
Marcin Kniwel - 07704937155

Warwickshire – Langford Builders – 07739 695442 – Langford Builders

Coventry – Paul Oliver – 07778 215889

Wellesbourne / Stratford – Landscapes Unlimited – 07818 063888 - Landscapes-unlimited.co.uk

Banbury – G & A Construction (My Builder contact)

Rugby – Peter Young – 07836  546089

Rugby – CFW Groundwork Ltd (My Builder contact) – 07960 3810708

Leicestershire – Scott McCue – 07916 138164

Leicestershire – Adrian Henson – 07858 459221

Redditch – Worcs (25 mile radius) – Matthew Phillips Engineering ltd – 07920 442871

Roebuck Building Company – Stratford on Avon | Leamington Spa – 07967 601153 – https://www.roebuckbuildingcompany.co.uk/

Kenilworth Area – Grahame Barham Davies. Tel: 07889 906999

Moreton in Marsh – Robert Power – 07590 836219

SOUTH

Northampton – Alan Muxlow – 07970 87598

London – Jonathan Stollar – 07963 664951

Hampshire / Dorset – Jim Parker – 07746 196343

Milton Keynes – Frosts Landscapes – 0845 021 9001

Hemel Hempstead – Urban Diggers – 07846 430927

London – Layzall Architects – 07709 123876

London – City Innovations – 0208 874 1565

Surrey / Berkshire / Hampshire – Tony Cleeve – 07775 900063 – 01344 563042

Buckinghamshire – Hertfordshire – North London – Mike Harrison, +44 7778 978534 – the base was superb from this provider

Bishops Stortford | Royston – Mike Clayton-Smith – CCS Landscapes – 07967720158 – garden and base excellent

Bedford / Milton Keynes – Benchmark Construction – Rob Mason – 07931815758

Cambridgeshire – Cambridgeshire Landscapes & Design – Geoff Clements – 01353 698275

Question 6

How long will my shed last

Accepted Answer

We expect the shed to last at least 10 years especially as it is built using tanalised timber, however with regular maintenance and a bi-annual treatment, we know of our sheds that have lasted up to 20 years, and are still going strong.To maximise the lifespan of your building, you might want to Start with a concrete or paving slab baseUpgrade the roofing materialPaint the building every couple of years

Question 7

What are the standard bearers

Accepted Answer

Standard bearers are 2"x2" (47mm x 47mm) tanalised timber joists, spaced at 15" (380mm) centres. These provide a strong foundation and a suitable air flow under your building. 
If you wish to upgrade to 3"x2" bearers, this will add more support to the floor of your building making it more durable for years to come. The upgrade cost is priced in the options for each building.

Question 8

What is the lead time

Accepted Answer

The lead time is usually as follows:

Spring = 2 to 4 weeks
Summer - 3 to 5 weeks
Autumn - 4 - 6 weeks
Winter - 1 - 2 weeks.

Delivery and assembly takes place on the same day, i.e. the delivery team also assemble the building for you.

Question 9

What is the standard felt?

Accepted Answer

The standard roofing felt is a polyester based mineral felt, in green unless another colour is required. This is far superior than either a standard shed felt or slaters felt, which are paper thin or sand based. The polyester based felt is much more durable and resistant to the elements, and designed to expand and contract throughout the seasons without failing.

Question 10

What is the standard height

Accepted Answer

Standard heights are as follows:Superior Apex Shed 
Standard Eaves Height = 1.83m | Ridge Height = 2.3m
Increased Eaves Height = 1.93m | Ridge Heght = 2.4mSuperior Pent Shed Superior Apex Shed Standard Eaves Height = 1.83m | Ridge Height = 2.3mIncreased Eaves Height = 1.93m | Ridge Heght = 2.4mIncreased Eaves Height = 1.915m | Ridge Heght = 2.37mWarwick Range & Cotswold Range
Standard Eaves Height = 1.95m | Ridge Height = 2.4mPrestige Apex Workroom
Standard Eaves Height = 1.84m | Ridge Height = 2.39mIncreased Eaves Height = 1.95m | Ridge Heght = 2.5m
Prestige Pent WorkroomStandard Eaves Height = 1.84m | Ridge Height = 2.31mIncreased Eaves Height = 1.95m | Ridge Heght = 2.42m

Question 11

What is the standard cladding

Accepted Answer

The cladding on the majority of buildings is 15mm pressure treated shiplap which provides a rot resistant finish for 15+ years.. The wood itself is a redwood from Scandinavia - meaning that it is slow grown and has tighter growth rings than white wood. The tighter growth rings mean the more timber is less subjective to expansion and contraction as there is less spongy material to absorb the moisture in the air.What does tanalising mean?Tanalising the timber is a way of preserving the wood for a long period, and is superior to a dip treated or untreated finish. The timber is put into a large tube, filled with the water & preservative mixture, before being sealed and pressurized. This method penetrates the preservative into the timber for a long lasting effect. Once the timber has dried it can be left to fade naturally, or be stained or painted without any adverse effects.The cladding itself is as follows:Apex Sheds: Tongue & Groove (Ex 19mm) 15mm finish  Pent Sheds: Tongue & Groove (Ex 19mm) 15mm finish  Cotswold Buildings have Sawn Feather Edge 23mm > 6mm rebated boards20mm finished Logroll is available on all buildings

Question 12

What is the standard framing

Accepted Answer

Standard framing on the buildings is tanalised for durability and planed all round for consistency. Each building has the standard details as follows:Superior Sheds: 34mm x 47mm (finished size) Tanalised PAR framing
The Warwick Range: 34mm x 47mm (finished size) Tanalised PAR framingPotting Sheds: 34mm x 47mm (finished size) Tanalised PAR framingPrestige Workrooms: 34mm x 70mm (finished size) Tanalised PAR framingCotswold Range: 34mm x 70mm (finished size) Tanalised PAR framingStratford Summerhouses: 34mm x 70mm (finished size) Tanalised PAR framing

Question 13

What are the window options

Accepted Answer

Classic Windows are approximately 510mm wide x 660mm high available in the following formats:Single Window (510mm wide) either Fixed or Open (Top Hung)Double Window (980mm wide) - Fixed as standard but each unit can have an opening fittedTriple Windows - (1455mm wide) - Fixed as standard but each unit can have an opening fittedSee the building specifications for the amount of windows included with each sizeAdditional windows can be purchased if required.Cottage Windows are available in the following formatsThe windows are the same as the Classic windows and feature a plant on georgian + bar.They are the same size as the classic windows and are available as 4 Pane fixed or open8 pane fixed (or open)12 pane fixed (or open)

Question 14

What about painting

Accepted Answer

The buildings can all be painted prior to delivery, however you would need to choose a colour from the Thorndown paints range. All painted buildings have the boards individually painted before assembly, to prevent untreated gaps appearing after assembly.You can either paint all of the building including the doors and windows in one colour, or you could have a contrast colour on the doors and windows.You could also just paint the doors and windows only, leaving the rest of the shed in the standard dipped coloured treatment.Please note that the painting is only to the external walls.

Question 15

Can I have a different size?

Accepted Answer

Yes you can. We don't list all the sizes that are available on the website as the possibilities are endless. 
If you require a specific size, please send us a message with the size and type of shed you are looking to have

Question 16

Can I have a bespoke design

Accepted Answer

Yes that is possible. 
For example, a building with a covered veranda, or a summerhouse with a partition and a shed door are all possible, even if they aren't listed on our website.
The buildings are built to order from scratch, so if you need something specific please send us a sketch of the building you are looking to have, so we can provide a detailed quote for you.

Garden Sheds & Summer Houses

TEL: 01926 354685

Reviews

Top Quality
Tanalised Garden Sheds

Other Timber Buildings

Combo Buildings

Frequently asked questions

Do I need planning for a shed?

Does the shed include assembly

Who does the base?

What base do I need?

Do you have any base recommendations?

How long will my shed last

What are the standard bearers

What is the lead time

What is the standard felt?

What is the standard height

What is the standard cladding

What is the standard framing

What are the window options

What about painting

Can I have a different size?

Can I have a bespoke design

Garden Sheds & Summer Houses

TEL: 01926 354685

Reviews

Top Quality Tanalised Garden Sheds

Other Timber Buildings

Combo Buildings

Frequently asked questions

Do I need planning for a shed?

Does the shed include assembly

Who does the base?

What base do I need?

Do you have any base recommendations?

How long will my shed last

What are the standard bearers

What is the lead time

What is the standard felt?

What is the standard height

What is the standard cladding

What is the standard framing

What are the window options

What about painting

Can I have a different size?

Can I have a bespoke design

Top Quality
Tanalised Garden Sheds